Measuring Guide
Measuring inside a recess
- First ensure that the recess your blind is going into is not obstructed in any way so the blind can hang freely when fully extended.
- Make sure the recess is at least 75mm (3 inches) deep, otherwise it will not be able to accommodate the operating mechanism.
- Measure the total width from A to B and the length from C to D (See diagram). Do this in several places to allow for any slight variation or irregularity in your windows.
- Make a note of the narrowest of these measurements, to the nearest millimetre using a metal tape measure.
Measuring inside a recess
82%
Measuring outside a recess
- Decide how far you want the fabric to overlap on all sides – we recommend this should be at least 45mm (1 ¾ inches)
- For roller blinds, add a further 38mm (1 ½ inches) for the winding mechanism
- Carefully measure the width from E to F (see diagram). Measure from G to H to the length you require.
- Make a note of these measurements to the nearest millimetre using a metal tape measure.
Measuring outside a recess
95%